28m Telescopic Boom Lift, 25m Working Range|Voyantek

The 28 m telescopic boom lift is the long-reach workhorse of the Jobanglift self-propelled series. The HSJBZ28M-LI combines a 28 780 mm maximum working height with a 25 000 mm working range, the longest outreach in the range, on a 638 Ah / 76.8 V full-lithium drive with 45% (24℃) gradeability for rough site conditions. We build it for the jobs a 23 m machine cannot reach.

A 28 780 mm working height (26 780 mm platform height) puts operators on nine- to ten-storey façades, industrial rooflines, telecom and transmission structures and large-span steelwork. On the 2 400 × 900 mm platform, two operators with tools work within the 300 kg unrestricted rating, and the 360℃ turntable with ±90℃ platform rotation keeps the basket square to the structure anywhere in the envelope.

The 25 000 mm maximum working range is what separates this model from the 23 m and 34 m units. It lets the boom stand back from the structure, across plant rooms, pits, canopies or open ground, and still place the platform precisely. Reach is the reason to buy this one. In the 460 kg limited-capacity zone the platform can carry heavier material such as glazing panels, welding rigs or façade modules; the machine controller enforces the 300 kg unrestricted / 460 kg limited limits automatically by boom angle and radius. Send us the site layout and we will tell you honestly whether you need 25 m of reach or whether the 23 m model saves you money.

Gradeability is 45% (24℃) with a 25% (14℃) maximum lateral driving slope, and the machine rides on 19-625 tyres over a 3 200 mm wheelbase with four-wheel drive and oscillating axles in the series configuration. Travel is 5 km/h stowed and a controlled 0.6 km/h with the boom raised. Turning radii are 6 500 mm (outer) and 3 500 mm (inner), and the 1 920 mm tail swing must be allowed for when slewing close to walls.

A 638 Ah / 76.8 V lithium battery, the largest we fit in this series, feeds a 5.2 kW / 80 V DC walking motor and a 21 kW / 52 V AC oil pump motor, charged by an 80 V / 40 A on-board charger. The 185 L hydraulic tank and 12 V DC auxiliary power unit (emergency lowering pump) complete the power package; routine care follows our programme. Zero exhaust emission and low noise keep the machine usable indoors and in occupied urban sites.

The machine weighs 16 600 kg, stows to 11 470 mm and shortens to a 9 185 mm transport length for trailer shipment. Confirm trailer rating, route permits and offloading equipment for the destination market. Our team sizes the transport plan per project, and certification documents (EAC / CU-TR, quality management system) are available on request. For purchasing-oriented questions and factory pricing, see the 28m straight boom lift page or send your specification directly.

Q1: How high and how far does the 28 m telescopic boom lift reach?
A1: The HSJBZ28M-LI reaches a 28 780 mm maximum working height, a 26 780 mm platform height and a 25 000 mm working range, the longest outreach in the self-propelled range. For smaller envelopes the 23m telescopic boom lift covers 24 m / 16.5 m at lower transport weight.

Q2: What does the dual 300/460 kg capacity mean in practice?
A2: 300 kg (two operators plus tools) is permitted anywhere in the full envelope; 460 kg is permitted in the limited zone shown on the load chart, typically at shorter radii, which is useful for glazing, cladding and equipment installation. The controller switches capacity automatically. See common for matching capacity to task.

Q3: Is it suitable for rough ground and slopes?
A3: Yes. Gradeability is 45% (24℃) and the lateral slope limit is 25% (14℃), on four-wheel drive with oscillating axles and 19-625 tyres. As with all , verify bearing capacity and levelness of the ground at each work position before set-up.

Q4: How is the machine transported and offloaded?
A4: Transport length is 9 185 mm at 16 600 kg total weight, shippable on a standard low-bed trailer. Plan a offloading point with suitable lifting or ramp access; the 12 V DC emergency pump allows controlled lowering even with the main power off. and we will confirm the transport plan.

Q5: What certification documents are available?
A5: Quality management system certificates, EAC / CU-TR conformity documents for CIS markets and ECM documentation can be provided. Confirm the destination-market requirement before contract via our .

Cool tags: 28m telescopic boom lift, 25m working range|voyantek, China 28m telescopic boom lift, 25m working range|voyantek manufacturers, suppliers, factory